Coates Mitre 10 Lithgow New Product ... Easy Gate

The Coates Mitre 10 Home & Trade Lithgow team is committed to carefully selecting a range of products that will meet the needs of any job.

However, if there is a specific product you are looking for which is not in stock, we will order it in for you.

The introduction of the "easyGATE" system means that building has never been easier. Assembly time is cut to just minutes and the job just can't help being squared. Sagging gate problems are eliminated.

The "easyGATE" system can be used to build a gate of up to 1800 mm wide and of any height. The cosmetic design of the gate itself is only limited to your imagination. Various Sizes of Lumber can be used for Horizontal Rails (i.e. 45x70 mm, 45x90 mm, 45x140 mm) and the system lends itself to Pre-Fab fence panel applications.

"easyGATE" comes with a LIFETIME REPLACEMENT WARRANTY, absolutely guaranteed by the manufacturer and all fittings are included.

	1. Determine the swing of the gate (eg. either in-swinging or out-swinging) left hand or right hand hinged. Cut the top and bottom 45 x 90mm timber rails at least 25mm narrower than the opening for the gate. Attach the 45 x 90mm rails to the frames with the screws provided.
	2. Determine the swing of the gate (eg. either in-swinging or out-swinging) left hand or right hand hinged. Cut the top and bottom 45 x 90mm timber rails at least 25mm narrower than the opening for the gate. Attach the 45 x 90mm rails to the frames with the screws provided.
	3. Determine the swing of the gate (eg. either in-swinging or out-swinging) left hand or right hand hinged. Cut the top and bottom 45 x 90mm timber rails at least 25mm narrower than the opening for the gate. Attach the 45 x 90mm rails to the frames with the screws provided.

NEW PRODUCT REVIEW

easyGATE